Η Chevrolet προσφέρει διάφορα αξεσουάρ για τη νέα γενιά της Camaro και ανάμεσα σε αυτά, είναι και το Ground Effects bodykit. Αυτό αποτελείται από νέο μπροστά splitter, πλαϊνές ποδιές και πίσω προφυλακτήρα, αγριεύοντας κατά πολύ την εμφάνιση της Camaro.
Να θυμίσω πως η Camaro SS φορά τον LT1 V8 κινητήρα 6,2 λίτρων της Corvette, απόδοσης 455 ίππους και 617 Nm ροπής, με άμεσο ψεκασμό, μεταβλητό χρονισμό βαλβίδων, σύστημα απενεργοποίησης κυλίνδρων και συνδυάζεται είτε με 6-τάχυτο μηχανικό, είτε με 8-τάχυτο αυτόματο κιβώτιο. Τα 0-96 χλμ/ώρα τα κάνει σε 4,3 δευτερόλεπτα με το μηχανικό κιβώτιο (4 δευτ. με το αυτόματο), ενώ το 400αρι το κάνει σε 12,5 και 12,3 δευτ. αντίστοιχα.
[learn_more caption=”Δελτίο Τύπου”]
DETROIT – As the all-new Gen Six Camaro rolls into showrooms this fall, Chevrolet is matching its introduction with accessories and performance parts that enable greater personalization and driving fun.
From performance air intake and exhaust systems, to lowering kits, ground-effects packages, spoilers and even performance Brembo® brake systems, the lineup is designed to offer customers choices for distinguishing their new Camaros on the street and making the most of the cars’ performance capabilities.
“These accessories and parts were designed, engineered and tested by our Camaro team, assuring proper fit and integration – and they are backed by Chevrolet,” said Jim Campbell, GM U.S. vice president of Performance Vehicles and Motorsports.
The roster of 2016 Camaro performance parts includes:
Performance exhaust – Kits will be available late this year for Camaro SS with the LT1 V-8 and Camaro LT with the 3.6L V-6. These axle-back systems enhance the performance sound of the Camaro and offer a premium appearance. Each is a direct replacement for the factory system and maintains the vehicle’s factory warranty. The kits are not compatible with the available dual-mode exhaust system.
Suspension lowering kits – Incorporating higher-rate front and rear coil springs, along with specifically tuned struts and shocks, theses kits are designed to provide an integrated package that provides an aggressive stance by lowering the vehicle up to 0.8-inch (20mm), while optimizing ride quality and vehicle performance. They also deliver a lower center of gravity that enhances the feeling of responsiveness. Four kits are tailored for LT and SS coupe and convertible models. The SS kits are not compatible with vehicles equipped with the available Magnetic Ride Control. They will be available in early 2016.
Brembo® performance front brake package (four-piston calipers) – Developed as an upgrade for Camaro LT models with the 2.0L Turbo and 3.6L V-6 engines, this kit features Brembo® four-piston aluminum calipers in red with performance brake pads and 13.6-in. x 1.2-in. (345mm x 30mm) vented and slotted Duralife™ rotors – the same size as the Camaro SS. The kit is a direct replacement for the original front brakes and includes low-expansion front brake hoses and all necessary hardware.
Brembo® performance front brake package (six-piston calipers) – Developed for the enthusiast looking for ultimate braking performance while maintaining street drivability. This Brembo® front brake system features six-piston monoblock aluminum calipers in red with performance brake pads and two-piece, 14.6-in. x 1.3-in. (370mm x 34mm) vented and slotted Duralife™ rotors (cast-iron braking rings with aluminum hats). This kit is available for all Gen Six Camaro models and includes low-expansion front brake hoses and all necessary hardware.
Performance air intake – This kit, available in early 2016, helps reduce air restriction and includes an open-element air filter, a sealed compartment with all the necessary installation hardware for the Camaro SS with the LT1 V-8.
Engine covers – These stylish, easily installed covers give the Camaro engine a show-quality appearance. They will be available by the end of the year in red, blue or black for the V-8 and V-6 engines and a cover for the 2.0L Turbo engine is planned as well.
These performance parts complement a full line of Camaro accessories including wheels, exterior and interior enhancements and graphics packages.
Three aluminum wheel designs, in multiple finishes
Grille kits with six body-color inserts for LT and SS models; inserts are also available in chrome-appearance or primed versions for custom painting
A blade-style rear spoiler and ground effects kit, each offered in 10 colors
Four exterior graphics packages, offered in multiple colors, including,” rally stripe,” front-fender “hash mark,” racing stripe designs and a body-side “spear” graphic
Interior trim kits, offered in multiple colors.
Customers can also select alternate-finish versions of existing features such as smoked taillamp lenses and blacked-out or LED-illuminated bowtie emblems.
Customers can view many of the accessories on the new Camaro using the online Camaro Visualizer.
“There’s almost no limit to the performance and personalization possibilities with the 2016 Camaro,” said Campbell.
Founded in 1911 in Detroit, Chevrolet is now one of the world’s largest car brands, doing business in more than 115 countries and selling around 4.8 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.