Η Local Motors είναι η πρώτη εταιρεία του κλάδου που συνδημιουργεί τα οχήματα της σε απευθείας σύνδεση με την εικονική κοινότητα των σχεδιαστών της, των κατασκευαστών της, των μηχανικών της και οπαδούς της από όλο τον κόσμο, ανακοινώνοντας τώρα πως έχει επιλέξει το σχέδιο του πρώτου 3D εκτυπωμένου “κατεξοχήν ψηφιακά κατασκευασμένου οχήματος” που θα κατασκευάσει και παραδώσει στη διεθνή έκθεση “The International Manufacturing Technology Show” (IMTS) που θα πραγματοποιηθεί στο Σικάγο, την δεύτερη εβδομάδα του Σεπτεμβρίου.
Υπήρχαν περισσότερες από 20 προτάσεις με τον νικητή να είναι ο Ιταλός Michele Anoé, ο οποίος κέρδισε $5.000 και μια πρόσκληση για το IMTS ώστε να δει το αυτοκίνητο από κοντά. Το αυτοκίνητο θα κατασκευάζεται αποκλειστικά με τη χρήση 3D εκτυπωτή, με την Local Motors να λέει ότι «θα αποδείξει πόσο βιώσιμες είναι οι πράσινες τεχνολογίες και θα μπορεί να παρέχει ισχυρότερα, ασφαλέστερα, πιο γρήγορα και πιο αποδοτικά οχήματα.”
Αν η τεχνολογία της εταιρίας λειτουργεί όπως την διαφημίζει, τότε θα χρειάζεται περίπου πέντε ημέρες για να κατασκευάσεις το αυτοκίνητο από το μηδέν. Η εταιρεία αρνήθηκε να επεκταθεί σε περαιτέρω λεπτομέρειες, αλλά είπε ότι το αυτοκίνητο θα είναι ένα ηλεκτρικό όχημα “ειδικά κατασκευασμένο για τις ανάγκες των αστικών μεταφορών του Σικάγο.”
Σύμφωνα με τον CEO της Local Motors, Jay Rogers,
Η IMTS είναι το τέλειο μέρος στο οποίο θα αναδείξει την επόμενη εξέλιξη του World of Vehicle Innovations της Local Motors. Για να παραδώσει το πρώτο συν-δημιουργούμενο, τοπικής εμβέλειας, 3D εκτυπωμένο όχημα σε μια διεθνή έκθεση, αφιερωμένη στη τεχνολογία αιχμής είναι μια ισχυρή ενίσχυση της δέσμευσης μας για οδηγήσουμε την τρίτη βιομηχανική επανάσταση.
[learn_more caption=”Δελτίο Τύπου”]
Local Motors Announces Winners of First-ever 3D-printed Car Design Challenge
Selected from more than 200 submitted concepts, the winning design will inspire the full-size Local Motors prototype vehicle that will be printed at IMTS in September 2014
Phoenix, AZ – June 5, 2014 – Local Motors, Inc. is excited to announce the winners of the first 3D Printed Car Design Challenge that was launched in April to uncover concepts that will inform and influence the vehicle that will be printed live at IMTS – The International Manufacturing Technology Show 2014 in Chicago, Illinois, September 8-13, 2014. More than 200 entries, representing submissions from 30+ countries around the globe, were submitted during the six-week challenge. After a weeklong voting period and review of all entries by an independent panel of expert judges, a total of seven designs were selected as winning concepts.
The winning concept, Strati, created by Michele Anoé of Italy, will highly inspire the full-size 3D printed prototype. “It’s simple and clean, with character,” says challenge judge and MakerBot CEO Bre Pettis. “It has a nice style that really hangs together.” Lonnie Love, Group Leader, Robotics and Manufacturing Systems Research at Oak Ridge National Laboratory, adds, “Michele’s design offers an excellent balance between innovation, complexity and practicality. It has good 3D lines and the retractable roof is really cool.”
Michele will receive a $5,000 cash award for his submission and will be invited to see his concept manufactured live in AMT’s Emerging Technology Center, Booth N-650, at the IMTS Show this September.
“There are three major challenges facing the auto industry today; part count, weight, and the initial cost of tooling when creating and iterating on vehicles. The hybrid Direct Digital Manufacturing process stands to address all three of these,” said Jay Rogers, Local Motors CEO. “When these hurdles are removed, we open the door to an exciting new era in automotive design and manufacturing possibilities.”
Six additional concepts were recognized for their innovation and popularity among the members of Local Motors’ global community. Some aspects of these designs may also be incorporated into the final prototype. The designers of each of these concepts will receive a $1,000 cash award from Local Motors.
Internal Strut Frame
A favorite from the beginning, Internal Strut Frame has an innovative design that uses vertical struts to support the upper surfaces, saving weight and making a sturdy frame/ body. This concept was selected as the “community favorite” by members of Local Motors’ global community.
Aeroblade
Also employing an innovative use of vertical structures to support external surfaces, catering to the inability of current 3D printing process to bridge horizontal gaps, this multi-layer design was described as “very futuristic” by judge Douglas K. Woods, President, AMT – The Association For Manufacturing Technology. “This design really has the ‘wow’ factor, like something Batman or the Green Hornet would drive.”
3DPCX
Creative structural supports – including the spine down the center – and a clean passenger compartment are defining elements of this concept. In his judges notes, Paul R. Warndorf, Vice President, Manufacturing Technology, AMT noted, “By incorporating simplicity and innovation via smart design and smart deployment of vehicle features, the 3DPCX brings the openness of the road inside the vehicle.”
LM Supernova
The LM Supernova incorporates interior design elements that are not only innovative and well thought out, but highly functional and lightweight. This is a great example of using good design and engineering to create a truly innovative vehicle. According to Woods, “The Supernova looks tough and fast, like a Formula 1 racecar.”
Mirage
The Mirage took an innovation award for incorporating layers to create 3D Printed ‘crumple zones’, which is not only unique, but also very innovative. Taking into account how the technology could be used, the Mirage concept “is a great looking car, offering some solid suggestions for what can be achieved with additive manufacturing,” said Rick Neff, Manager, Market Development for Cincinnati Incorporated.
LM e-Spider
“A tribute to the minimalist in all of us, the e-Spider merges the efficiency of a smart car with the effectiveness of a desert dune buggy,” said AMT’s Warndorf. The e-Spider’s roof design and windshield connections, as well as the incorporation of shielding accessories to allow for use in severe weather, showed a great combination of innovation and practicality.
About the partnership with Local Motors and this endeavor to deliver the world’s first 3D printed vehicle prototype, Peter R. Eelman, Vice President, Exhibitions & Communications, AMT had this to say, “This continues the legacy of Local Motors bringing disruptive technology to IMTS. We started this journey in 2010 when Jay Rogers appeared at AMT’s Annual Meeting, and from that, a partnership emerged to build the Rally Fighter on the show floor at IMTS 2012. We are excited to showcase the winner’s innovative design and demonstrate to the industry this new process of manufacturing a car with a substantial structure being 3D printed on-site in AMT’s Emerging Technology Center at IMTS 2014.”
[/learn_more]