H Kia θα παρουσιάσει το νέο ηλεκτρικό της ποδήλατο K-velo στη Γενεύη

Σχετικά άρθρα

Kia K-velo electric bike teaser

Η Kia έδωσε στη δημοσιότητα μια teaser φωτογραφία του ηλεκτρικού της ποδηλάτου, που το ονομάζει K-velo, το οποίο θα παρουσιάσει στο περίπτερο της στην έκθεση της Γενεύης την επόμενη εβδομάδα.

Πιθανότατα να μη γνωρίζεις ότι η κορεάτικη εταιρία ξεκίνησε να κατασκευάζει ποδήλατα το 1944, έχοντας μεγάλη εμπειρία και γνώση επί του αντικειμένου. Το συγκερκιμένο e-bike τροφοδοτείται από έναν ηλεκτροκινητήρα 250 watt εξελιγμένο από τη Bosch, παράγει σταθερή ροπή 45 Nm, ενώ η ενέργεια αποθηκεύεται σε μια μπαταρία ιόντων λιθίου 10 amp και 36 volt. Η μπαταρία του μπορεί να αποσπαστεί και να επαναφορτιστεί από κανονική οικιακή πρίζα σε περίπου τέσσερις ώρες.

Η Kia θα παρουσιάσει δύο εκδόσεις του K-Velo, το πρώτο θα είναι ένα μοντέλο πόλης με αυτονομία μέχρι 70 χλμ., ενώ η εκτός δρόμου MTB παραλλαγή θα έχει αυτονομία περίπου 50 χιλιόμετρα. Το ηλεκτρικό ποδήλατο αναπτύχθηκε στο τμήμα έρευνας και ανάπτυξης της εταιρείας στην Ναμυάνγκ, της Νότια Κορέα και διαθέτει ένα μεταλλικό monocoque πλαίσιο, ενώ ζυγίζει περίπου 20 κιλά, με την τελική του ταχύτητα (ανεξαρ΄τητου επιλογής) να φτάνει μέχρι τα 25 χλμ/ώρα.

Η έκδοση πόλης φοράει ζάντες 28-ιντσών και λασπωτήρες, με τη μπαταρία να είναι προσαρμοσμένο στο πίσω μέρος, ενώ το MTB μοντέλο έχει ζάντες 27,5 ιντσών με ελαστικά παντός εδάφους, εμπρός πιρούνι RockShox 100 χιλιοστών και μπαταρία τοποθετημένη μέσα σε πακέτο.

[learn_more caption=”Δελτίο Τύπου”]

Kia showcases eco-mobility in Geneva with new K-velo electric bike

  • Kia K-velo promises electric range of up to 70 km
  • Features technical innovations in design, specification and manufacturing
  • Two models – City and MTB – made from ultra-high strength steel

Geneva, March 3, 2015 – Kia Motors will unveil the latest versions of its prototype K-velo electric bikes at the 2015 Geneva Motor Show, showcasing the brand’s ongoing efforts in pioneering eco-friendly future mobility.

The new Kia K-velo is a ped-elec electric bike, shown in both City and MTB versions, offering zero-emissions transport. In either form, the K-velo promises lively performance from its powerful electric motor, while incorporating a host of technical innovations in the bike’s design, specification and manufacturing techniques. The K-velo draws on innovations and processes used by Kia’s global car production facilities.

Range of up to 70 km from innovative electric powertrain
The rear-wheel drive K-velo is propelled by an innovative electric powertrain from Bosch, with a 250 Watt electric motor, which produces a generous 45 Nm of torque, powered by a 36 volt, 10 amp / hour lithium-ion polymer battery pack.

The City model will appeal to commuters thanks to a range of up to 70 km – an improvement of 30 km over Kia’s 2014 electric bike prototypes – while the MTB version, designed for use in harsher, off-road environments, will offer a cycle range of around 50 km.

For ease of use, the power back is easily detached for recharging – a process expected to take around four hours from a domestic power supply.

Both the City and MTB models feature the same drivetrain and power pack and weigh around 20 kg in total. A top speed of 25 kph complies with EU regulations for electric bikes.

Automotive manufacturing techniques
Designed and engineered by Kia’s Venture Business Development Team at the company’s Namyang R&D centre in Korea, the K-velo features an innovative monocoque metal frame, produced by an advanced metal stamping technology and a robotic automated welding process. The result is an E-bike manufactured with automotive-industry levels of production and quality control.

Advanced metal stamping technology is a new production method specially developed at the Namyang R&D centre for manufacturing the K-velo’s ultra-high strength steel frame. After pressing a metal sheet each side of the frame, the ‘skeleton’ of the bike then undergoes a robotic automated welding process to ensure uniform quality. This is in contrast to the frame of more conventional bicycles, which are often manufactured by hydroforming, increasing the complexity and cost of production.

Using these production methods has allowed Kia a greater degree of design freedom, with distinctive surfacing details and a unique structural design. A greater choice of metals can be used during production, with metal stamping allowing the frame to be made up of aluminium, high-tensile steel or stainless steel.

City vs. MTB – broad appeal for commuting and off-road adventures
The City is intended as a universal design to appeal to commuters, with its step-through frame, rear-mounted battery, 28-inch wheels and mud-flaps. The MTB is designed for off-road use, and features RockShox 100mm front forks, a mid-mounted battery and 27.5-inch wheels fitted with all-terrain tyres.

The frame, electric motor and power pack are manufactured in Korea, while final assembly is carried out in Germany, with the addition of braking and gear components from Shimano in Japan.

[/learn_more]

#trending

#trending

Αξίζει να δεις
Featured

Περισσότερα νέα

Νέο Kia K4

H Kia έκανε γνωστές όλες τις λεπτομέρειες της νέας γενιάς του K4, που εκτός από σεντάν θα προσφέρεται και ως hatchback. Το αυτοκίνητο αντικαθιστά...

Η Kia ανακαλεί 22.915 Soul EV

Η Kia ανακαλεί 22.915 Soul EV που κατασκευάστηκαν μεταξύ 2014 και 2018 επειδή το σύστημα διαχείρισης της μπαταρίας ενδέχεται να μην αναγνωρίζει τις μη...

Η Kia αποκάλυψε το νέο K4

H Kia παρουσίασε σήμερα τη νέα γενιά του K4, που θα ντεμπούτο στην έκθεση αυτοκινήτου της Νέας Υόρκης, που ανοίγει τις πύλες της στις...
Autoblog.gr